fbpx

smart painters

MENU

Blog

Handy Hints for Programming Somfy RTS Motors

  • 09
  • 02
  • 2018

Somfy programming instructions

Creating a group channel:

Select channel 1

  • Press program on back of remote until motor jiggles
  • Select channel 5 (or selected group channel)
  • Press program on back of remote again

Select channel 2

  • Press program on back of remote until motor 2 jiggles
  • Select channel 5 (or selected group channel)
  • Press program on back of remote again
  • Repeat process until all motors are programmed on one channel

Adjust lower limit:

  • Press the down button and send the product to the existing lower limit position
  • Press and hold the up & down arrows until the motor jiggles
  • Adjust to the correct/desired lower position by using the up & down arrows
  • Press and hold the middle (my) button until the motor jiggles
  • New limit has been set

Adjust upper limit:

  • Press the up button and send the product to the existing upper limit position
  • Press and hold the up & down arrows until the motor jiggles
  • Adjust to the correct/desired upper position by using the up & down arrows
  • Press and hold the middle (my) button until the motor jiggles
  • New limit has been set

Pairing new remote:

  • Set the motor in programming mode with an existing rts remote control by selecting the channel you wish to duplicate
  • Press the program button on the back of the existing remote until the motor Jiggles
  • Press and hold the program button on the back of the new remote until the same motor jiggles
  • Repeat process through each channel/motor you wish to duplicate

Setting an intermediate position:

  • Use the up or down button to move the product towards the desired intermediate position
  • Stop the product at the desired intermediate position by pressing the middle (my) button
  • Press and hold the middle (my) button until the motor jiggles.
  • Intermediate (my) position has been set

Deleting an intermediate position:

  • Send the product to the intermediate position by pressing the middle (my) button
  • When the product has reached the intermediate position and stopped, press and hold the middle (my) button until the product jiggles.
  • Intermediate (my) position has been deleted